Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Keller, TX

Wayne Dalton Garage Door Panel Replacement in Keller, TX

Dented, cracked or rusted sections replaced or repaired to match your door. Typical cost $300-$900.

Wayne Dalton Garage Door Panel Replacement is one of the most common calls we get. A technician will explain what is wrong and what it will cost before starting, and test the door before leaving. Dented, cracked or rusted sections replaced or repaired to match your door. Whether your Wayne Dalton garage door is a few years old or a few decades, we can diagnose it and tell you honestly whether it is worth repairing. Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Is it time for Wayne Dalton garage door panel replacement?

  • Dents or creases from a vehicle, ball or hail
  • Cracked or split sections
  • Rust coming through the paint, often on the bottom panel
  • Panels bowing so the door binds

Common causes

  • Impact from cars, equipment or storms
  • Moisture rusting the bottom panel
  • Wood panels rotting or splitting
  • An unbalanced door bending the top section

Safe checks before you call

  • Note the brand and model from the label on the door's edge or inside face.
  • Photograph the damage. It helps us match the panel.
  • Check whether the damage spreads across the hinge line.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

What happens during the visit

  1. Identify the door's brand, model, design and color
  2. Confirm the panel is still available, or price a replacement door if it isn't
  3. Remove the damaged section safely
  4. Install and align the new panel and hardware
  5. Rebalance the door, since panel weight can change

Discontinued panels can be hard to match. If several sections are damaged, a new door is often the better value.

Wayne Dalton Garage Door Panel Replacement cost in Keller, TX

$300-$900Typical range, parts & labor
1-3 hours once the panel arrivesTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Wayne Dalton services

Local Wayne Dalton garage door panel replacement for Keller, TX

In Texas, steel panels rust where the paint has been scratched or dented, and wood doors swell, warp or rot if the finish isn't kept up.

Parts of Texas are exposed to hurricanes and tropical storms. A garage door is often the largest opening in a home, so wind-rated doors and reinforcement kits matter here, and building codes in coastal areas may require them when a door is replaced.

Hailstorms are common in parts of Texas. Hail can dent steel panels and crack windows, and thicker-gauge or insulated doors resist dents better than thin single-layer steel.

Our Wayne Dalton garage door panel replacement service covers Keller (ZIP codes 76244 and 76248) and nearby towns including Roanoke (5 mi), Watauga (5.3 mi), Trophy Club (5.9 mi) and Colleyville (6.7 mi). Call (833) 435-8883 to book a visit in Keller.

Wayne Dalton Garage Door Panel Replacement: frequently asked questions

How much does Wayne Dalton garage door panel replacement cost in Keller, TX?

Wayne Dalton Garage Door Panel Replacement typically costs $300-$900 including parts and labor, and usually takes 1-3 hours once the panel arrives. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Wayne Dalton garage door panel replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Wayne Dalton garage door panel replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Wayne Dalton warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Texas or Keller requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Keller, TX

Commercial Overhead Door Installation

Commercial sectional, insulated and high-cycle doors and operators installed.

Typical $2,500-$12,000

Marantec Garage Door Opener Repair

Marantec is a German manufacturer of residential and commercial door openers.

Typical $125-$350

Hörmann Garage Door Opener Repair

Openers that hum, click, reverse or won't respond, diagnosed and repaired.

Typical $125-$350

Chamberlain Garage Door Opener Repair

Chamberlain is the retail line of The Chamberlain Group, sold at home centers. It uses the same Security+ 2.0 remote technology and myQ app as LiftMaster, so many accessories work with both brands.

Typical $125-$350

Moore-O-Matic Opener Circuit Board Replacement

Moore-O-Matic openers are no longer made. We can often keep one running with available parts, or recommend a modern replacement.

Typical $175-$400

Chain Drive Opener Repair

Chain-drive openers repaired, re-tensioned or replaced.

Typical $125-$350

Chamberlain Opener Gear & Sprocket Replacement

Chamberlain is the retail line of The Chamberlain Group, sold at home centers. It uses the same Security+ 2.0 remote technology and myQ app as LiftMaster, so many accessories work with both brands.

Typical $125-$275

Chamberlain Garage Door Sensor Repair

Chamberlain is the retail line of The Chamberlain Group, sold at home centers. It uses the same Security+ 2.0 remote technology and myQ app as LiftMaster, so many accessories work with both brands.

Typical $100-$250

Ryobi Garage Door Opener Repair

Ryobi's garage door opener can use the brand's 18V ONE+ batteries as backup power and has accessory ports for add-ons.

Typical $125-$350

Remote & Keypad Programming

Remotes, keypads and car buttons matched and programmed to your opener.

Typical $50-$150

Amarr Garage Door Installation

Amarr, an ASSA ABLOY Group brand, makes residential lines such as Classica, Heritage, Lucern and Oak Summit, as well as commercial doors.

Typical $1,200-$4,500

Midland Garage Door Weather Seal Replacement

New bottom seals, threshold seals and perimeter stops to keep out water and drafts.

Typical $100-$300

Garage door stuck, noisy or broken?

Talk to a garage door technician in Keller, TX now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote